|
Модульный сервер Fujitsu Siemens PRIMERGY BX600
Blade-сервер среднего уровня PRIMERGY BX600 идеально подходит для компьютерных центров предприятия и поставщиков прикладных услуг. Компактные и мощные blade-серверы идеально подходят в качестве платформы для любых приложений в компьютерных центрах. Модульные blade-серверы PRIMERGY BX600 отличаются высокой гибкостью, масштабируемостью, удобством в обслуживании и непрерывностью работы. Новейшие двухпроцессорные системы на базе процессоров Intel Xeon обеспечивают максимальную производительность на единицу объема.
Особенности конструкции и некоторые рабочие характеристики модели Fujitsu Siemens PRIMERGY BX600
Type Blade Server
Rack installation kits PRIMECENTER racksPRIMERGY DataCenter racksFujitsu and Rittal racks
Blade server chassis 7 U for 19-inch Racks
Dimension (H x W x D) in mm 307 x 446 x 735 mm
Weight (kg) max. 130 kg (with all components)
Mid-plane Connection of the server blades with the infrastructure components via SerDes mid-plane
Switch blades 1x hot-plug (rear), max. 2 (redundant)
Management blades 2x hot-plug (rear), max. 2 (redundant)
KVM switch 1x at the rear, max. 1; 1x SCSI module at the rear (2x VHDI connector)
Fans 2x hot-plug cages, each with 2 fans (redundant); additionally 3 fans per power supply module
FC blade pass-thru, optional, hot-plug (rear), max. 2
Free slots (bays) at the front: 10x for server blades;at the rear: 1x for Gbit Ethernet switch blades;2x for FC pass-thru blades;2x for additional hot-plug power supply modules
External interfaces 1x RS-232-C, 1x LAN RJ45 per management blade;3x Gbit Ethernet LAN (RJ) per switch blade;10x Fibre Channel with Gbic/SFP modules per FC blade;2x SCSI VHDI68 connections (useable by server blades no. 4 and 10)
Power supply 2 - 4 redundant hot-plug modules, each with 1200W
Server blades up to 10 hot-plug server blades per BX600system unit
Processors 1-2 Intel Xeon
Clock rate / FSB 2.80, 3.06 or 3.20 GHz / 533 MHz
Second level cache 512 Kbyte (2.80 GHz)
Third level cache 1 Mbyte (3.06, 3.20 GHz)2 Mbyte (3.20 GHz)
Chip set ServerWorks GC-LE
Memory 512 Mbyte - 12 Gbyte PC2100 registered 2-way interleaved ECC DDR SDRAM, memory scrubbing and hot-spare memory support
Flash EPROM BIOS update per USB floppy disk, USB CD-ROM or LAN
Interfaces 2x Gbit LAN ports via midplane at switch blade;1x VGA and 2x USB at the front via special cable;connection to the KVM switch via the midplane;opt. 2x 2Gbit Fibre Channel via midplane at FC pass-thru blade;opt. PCI slot module for LAN or RAID controller
Onboard controllers 2 channel Ultra320 SCSI with HostRAID support (RAID 0 and 1) (HostRAID only released for Windows 2000/2003 and Linux, not available for VMware);2x 10/100/1000 Mbit/s Ethernet; ATI Rage XL, 8 Mbyte;Baseboard management controller (BMC)
Hard disk drives 1-2 x 1-inch Ultra320 SCSI hot-plug (18/36/73/146 Gbyte)
Switch blades up to 2 hot-plug switch blades, 10/100/1000TX (layer 2) per BX600
LAN channels 10x downlink via midplane; 3x external uplink (3 RJ45 ports)
Management blades up to 2 redundant and hot-plug management blades per BX600
Interfaces 1x 10 Mbit Ethernet RJ45;1x RS-232-C (serial) connection to every server blade via the midplane
Power supply at all times via standby power
Operating systems support Microsoft Windows 2000 / 2003; SUSE and Red Hat Linux
| 
